Skip to content
Flame & Feast

Smoking times

How long to smoke 5 lb of beef short ribs

Mike Ross · How we research · Updated 2026-08-30

At the grate

6h 15m – 8h 45m

Rest

15m – 1h

Cook plus rest

6h 30m – 9h 45m

Plan for

9h 45m

The long end, always

When to light it

Work backwards from the long end. To serve 5 lb of beef short ribs at 6pm on a Saturday, light the smoker around Saturday 8:15am 9h 45m earlier.

That asymmetry is deliberate. Finished barbecue sits in a cooler for hours and arguably improves; an unfinished one at dinner time is not a problem you can solve. Being early is recoverable, being late is not.

The smoker calculator turns your own serve time into a clock time, and handles weights and temperatures between the ones charted here.

Why this is a range and not a time

The same beef short ribs can finish hours apart between cooks. Grade, fat, airflow, ambient temperature and how often the lid comes off all move the number, and a calculator can see none of them.

So the figures above are a window, not a prediction. A page that told you “8h 45m exactly” would feel more precise and be less true.

One thing worth being straight about: no institution publishes an hours-per-pound smoking rate for beef short ribs. USDA publishes safe internal temperatures, which are cited below, and a per-pound estimate for whole turkey — but not for this cut. The rate above is long-standing barbecue convention rather than a figure you can go and check, and the window is wide because that is the honest width.

What temperature to pull it at

Pull between 200210°F internal. The USDA safe minimum for this cut is 145°F, which is a food-safety floor rather than a target — the extra 55°F is about rendering connective tissue, not safety.

Plate ribs carry a lot of fat and forgive a higher pull temperature than brisket does.

That window is an internal temperature, and it is not what the lid gauge shows — a dome thermometer reads the air under the lid, not the centre of the meat. Hitting a 10°F window means measuring the meat itself, which is what an instant-read probe is for.

Safe minimums from the USDA FSIS Safe Minimum Internal Temperature Chart.

How much fuel it takes

On a pellet grill at 250°F, this cook burns roughly 6.313.1 lb of pellets — so have a 20 lb bag on hand. Cold and windy days push that higher.

For an offset or a charcoal cooker there is no figure here, and that is on purpose. Consumption depends on firebox size, wood species, split moisture and how the pit is run, and a number would be a guess wearing an estimate’s clothes.

That fits a single load on any of the grills we compare, whose published hoppers start at 13.5 lb. Longer cooks are where that stops being true. The pellet grill comparison has the capacities.

The same cut at other temperatures

We chart beef short ribs from 225275°F. Outside that range we have nothing to work from and will not extrapolate one.

Cook window for 5 lb of beef short ribs at each charted smoker temperature
Smoker tempCookPlan, with rest
225°F7h 30m – 10h11h
250°F6h 15m – 8h 45m9h 45m
275°F5h – 7h 30m8h 30m

Other weights at 250°F

What this cook actually needs

Every figure on this page is a range, and the only thing that closes it is measuring the internal temperature. Butcher paper is here because beef short ribs stalls and wrapping is the usual answer.

Common questions

How long to smoke 5 lb of beef short ribs?
7h 30m–10h at 225°F, 6h 15m–8h 45m at 250°F, 5h–7h 30m at 275°F, plus 15m–1h of rest. Pick the temperature first — it is worth about 2h 30m at the long end.
What internal temperature should 5 lb of beef short ribs be pulled at?
200–210°F. The USDA safe minimum for this cut is 145°F, which is a food-safety floor rather than a target. Plate ribs carry a lot of fat and forgive a higher pull temperature than brisket does.
Why is 5 lb of beef short ribs taking so long?
Almost certainly the stall. Evaporative cooling from the surface balances the heat going in, and the internal temperature stops climbing somewhere around 150–170°F — sometimes for hours. It is not a fault, and the fix is either patience or wrapping.

Keep reading